Debian Ports Installation
Installation of PA-RISC Linux
HPPA became an officially supported Debian architecture in release 3.0 (woody) and was dropped as of stable release 6.0 (squeeze). That's the reason that the latest available official installation CDs are available for Debian 5.0 (lenny) only.
The Debian ports project hosts a parisc version of debian unstable. We do NOT RECOMMEND to install debian unstable from debian-ports, because this repository has been frozen. Furthermore the udev package on debian-ports has a bug which will render your parisc system unusable. Nevertheless, the long term goal is to update the debian-ports repository with new versions. If you are interested of the current technical status of how parisc is being moved to debian-ports, see Debian_Ports.
Recommended installation of a new parisc machine is via the repository at http://ftp.parisc-linux.org/debian-ports/debian
Linux kernel for PARISC
We recommend at least a vanilla or stable series Linux kernel 3.10. Kernel 3.9 (stable series) should be OK too, as it has most fixes backported. Kernel 3.8 (or below) is not recommended any longer.
New installation of a PARISC machine via repository on http://ftp.parisc-linux.org/debian-ports/debian
- Download the temporary boot image from http://ftp.parisc-linux.org/debian-ports/unstable-boot-image/lifimage
- Burn the image as raw one to a cdrom or make it available as tftp bootimage
- Turn on your parisc machine and boot this media (via cdrom or tftp)
- This bootimage contains all tools (32- and 64bit bootkernel, fdisk, debootstrap, palo, scp, ...) to bootstrap a new debian unstable machine.
- use fdisk to partition your disk. Create a palo partition first (fdisk type f0, size >= 16 MB), then a /boot partition (needs to be in the first 2GB of a disk, ext2, fdisk type 83). A good size for the boot partition is 100-160 MB. Then create a root partition (any size) and a swap partition. Here is an example what "fdisk -l" could report (The Start and End sectors here are just examples. They can be different on your system):
Device Boot Start End Blocks Id System /dev/sda1 2048 165887 81920 f0 Linux/PA-RISC boot /dev/sda2 165888 247807 40960 83 Linux /dev/sda3 247808 142854143 71303168 83 Linux /dev/sda4 142854144 143374737 260297 82 Linux swap / Solaris
- format the /boot, /root and swap partitions:
mke2fs /dev/sda2 mke2fs -j /dev/sda3 mkswap /dev/sda4
- bring up your network (should be already done by an init screen, check your boot console). If you have a dhcp server you can run dhclient:
- mount the new designed /root to /mnt/destroot:
mount /dev/sda3 /mnt/destroot/
- run debootstrap. This may take some time (10-20 Minutes):
debootstrap --arch=hppa --no-check-gpg --include=palo --exclude=libsigc++-1.2-dev unstable /mnt/destroot http://ftp.parisc-linux.org/debian-ports/debian
- IMPORTANT: If you work on serial console, please remember to uncomment the following line in /etc/inittab else you won't see any login prompt on the serial console (kill -HUP 1 activates the change):
echo "T0:23:respawn:/sbin/getty -L ttyS0 9600 vt100" >> /mnt/destroot/etc/inittab
- IMPORTANT: Remember to set your new root password and add /dev/sda2 as /boot partition:
echo "/dev/sda2 /boot ext2 defaults,noauto 1 1" >> /mnt/destroot/etc/fstab chroot /mnt/destroot passwd root <now enter here your new password for root> exit
- You are now finished with the initial initialization of the filesystem.
- Now. reboot again from the CD/TFTP and choose to interact with IPL.
reboot now <wait...> Interact with IPL (Y, N, or Cancel)?> y Press "1" to change the "initrd=0/ramdisk" line, replace this line by "root=/dev/sda3" and press "b" to boot now.
- Search for the most recent Linux kernel (example here uses linux-image-3.10-1) and install it with the palo bootloader:
mount /boot apt-get install palo apt-cache search linux-image apt-get install linux-image-3.10-1-parisc64-smp - for 64bit SMP kernel (or) apt-get install linux-image-3.10-1-parisc - for a 32bit UP kernel palo --init-partitioned=/dev/sda --commandline="2/vmlinux-3.10-1-parisc64-smp root=/dev/sda3 HOME=/"
- You are finished. Reboot and enjoy.
Old installation medias (Debian Lenny)
If you have an older parisc system (not a c8000!) you may use the Debian Lenny installation medias to upgrade.
- Download one of the installation medias for Debian 5.0 (lenny) for parisc from one of the following locations:
- The debian-5010-hppa-netinst.iso or the debian-5010-hppa-xfce+lxde-CD-1.iso may work.
- Install Debian Linux. It's recommended to just install a minimalistic set of packages at this stage, since everything will be updated later to debian-unstable anyway. Furthermore every installed package may prevent your from easily upgrading.
- A very good documenation which covers PARISC specifics (e.g. PARISC bootloader and firmware) is available at http://www.pateam.org/parisc-linux-boot/doc.html.
- After installation you should upgrade to debian-unstable via the debian-ports repository:
- modify your /etc/apt/sources.list file to have this content:
deb http://ftp.debian-ports.org/debian unstable main deb http://ftp.parisc-linux.org/debian-ports/debian unstable main # for unstable sources if you want to compile yourself: deb-src http://ftp.debian.org/debian/ unstable main contrib non-free
- now instruct apt to pull the latest package list:
- packages in the debian-ports repository are signed. You will need to install the debian-ports archive signing key once (details see: http://www.debian-ports.org):
gpg --recv-keys 1C466F272FF7A9F4 gpg --export --armor 2FF7A9F4 | apt-key add -
- make sure you run a recent Linux kernel, at least 2.6.32. If possible upgrade to at least kernel 3.9 which seems to be the most stable release.
- run the usual command to upgrade your packages:
- if you run issues during upgrading packages, e.g. by strange dependency problems, it's often helpful to just deinstall some packages
- finally you should be able to update most packages to a more recent (unstable) version. If you miss some packages, please drop us an email on the mailing list http://lists.debian.org/debian-hppa.