Running HP-UX 9.0 on virtual HP9000/370 with MAME

From Linux PARISC Wiki
Revision as of 16:38, 7 January 2019 by Sven Schnelle (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Installation instructions for HP-UX 9 on hp9k360 (needs mame newer than 2018/10/23):

get the install images:

create a harddisk image file with: ./chdman createhd -f -o hpuxtest.chd -s $[512*1048576]

where 512 is the size in Megabyte, and can be adjusted to your needs.

./mame64 hp9k360 -sl2 -hard hpux9.chd -cdrom hpux9_install.iso

This will boot the installer:

File:Hpux9 install1.jpg

Press <Enter> to continue:

File:Hpux9 install2.jpg

Installer searching for disks: File:Hpux9 install3.jpg

It found our disk image: File:Hpux9 install4.jpg

Say 'y' to have long file names: File:Hpux9 install5.jpg

Press '1' to continue: File:Hpux9 install6.jpg

Accept the default swap setting by pressing enter: File:Hpux install7.jpg And, once again, press 'y' to continue: File:Hpux9 install8.jpg

Installer starts creating the filesystem: File:Hpux9 install9.jpg

Installer extracting the minimum HP-UX system: File:Hpux9 install11.jpg

The installer is now asking for the update CDROM: File:Hpux9 install12.jpg

Enter the Menu, and select 'hpux_9.1.update.iso': File:Hpux9 install13.jpg

After that is done, the installer shows the main menu, press enter to select all filesets: File:Hpux9 install15.jpg

Press Enter once again to confirm that you to install these filesets: File:Hpux9 install16.jpg

And, 'y' to really install: File:Hpux9 install17.jpg

And this is the final install screen. After it finishes install, it will reboot into HP-UX from hard disk. File:Hpux9 install18.jpg

Personal tools